Mitigating The Risk Of Flow-Accelerated Corrosion (Live Training, not pre-recorded)

Online course    30-Oct-2024    9:30 am - 1:00 pm EST (Eastern Standard Time)

 

After participating in this course, you will be able to do the following:

 

  • Understand the mechanisms of both types of Flow-accelerated Corrosion (FAC)
  • Diagnose FAC in your system
  • Understand how key parameters control the rate of FAC
  • Identify the type of components and areas of the plant that are most susceptible to FAC
  • Mitigate the risk of FAC in the design and operational phases
  • Discover the impact of cycling and part-load operation on the rate of FAC
  • Understand the advantages and limitations of chemical treatment additives in controlling FAC
  • Learn how to mitigate the risk of FAC

 

Description:

 

Flow-accelerated corrosion (FAC) is regarded as an increasingly common and very insidious type of failure mechanism in steam generation systems across many industries – from power generation to petrochemical. FAC is predominant in Heat Recovery Steam Generators (HRSGs) of combined-cycle and cogeneration plants. The proper management of FAC is of paramount importance since fatal injuries to workers have occurred in several power plants, and hundreds of piping and equipment failures have led to production losses and rising maintenance costs.

There are two types of FAC – single-phase and two-phase FAC, quite different in character and root cause. The troubleshooting of FAC can be complex, and distinguishing between the two types is essential to understanding the issues in contention and to the amelioration of the FAC problem. Many key variables play a role in FAC – mainly system hydrodynamics (system geometry, fluid velocity, steam quality, temperature), materials of construction as well as operating practices. Water or cycle chemistry, however, plays a relatively minor role. All of the above complexities have created confusion and conflicting opinions amongst independent power industry players worldwide.

This course presents several case studies together with Best Practice guidelines that are invaluable to owners and current operators of combined cycle/cogeneration plants as well as those involved in all design phases of such projects, through the potential incorporation of these best practices at the earliest possible stage.

 

Course Outline:

 

  • FAC Primer
  • How to diagnose FAC in your system (failure morphology and other leading indicators)
  • Distinguish between the two types of FAC (this is a critical step to understanding and controlling FAC)
  • Learn about the areas and components that are susceptible to FAC attack
  • Understand how key parameters control the rate of FAC (temperature, pH, ORP, fluid turbulence, metallurgy, design and operational factors, etc.)
  • Discover the impact of cycling and part-load operation on the rate of FAC
  • Learn about FAC Management Programs
  • Witness several case studies in industry

 

Who Should Attend

 

  • Plant Managers
  • Operation Managers
  • Maintenance Managers
  • Plant Engineers
  • Utilities Engineers
  • Technologists
  • Project Managers in the Chemical, Petrochemical, Chemical Processing and other industries
  • Reliability Engineers
  • Operators
  • Risk Management
  • Anyone involved in Plant Asset Management
  • Anyone involved in industrial steam generation systems

 

                                +++

Make sure to take a look at other upcoming courses:

Date/Time Event
20-Sep-2024
9:30 am - 3:30 pm
EST (Eastern Standard Time)
Industrial Cooling Water Treatment (Live Training, not pre-recorded)
25-Sep-2024
9:30 am - 3:30 pm
EST (Eastern Standard Time)
Cycle Chemistry for Power Plants - High-Pressure Boilers (Live Training, not pre-recorded)
01-Oct-2024
9:30 am - 3:30 pm
EST (Eastern Standard Time)
Reverse Osmosis and Nanofiltration Plant Technology – Best Practices (Live Training, not pre-recorded)
03-Oct-2024
9:30 am - 2:30 pm
EST (Eastern Standard Time)
Industrial Boiler Water Treatment - Low to Medium Pressure (Live Training, not pre-recorded)
08-Oct-2024
9:30 am - 2:30 pm
EST (Eastern Standard Time)
Industrial Boiler Water Treatment - Low to Medium Pressure (Live Training, not pre-recorded)
09-Oct-2024
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Layup (Storage) Best Practices for Steam-Water Touched Equipment (Live Training, not pre-recorded)
17-Oct-2024
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Fundamentals of Industrial Water Treatment Chemistry (Live Training, not pre-recorded)
22-Oct-2024
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Fundamentals of Industrial Water Treatment Chemistry (Live Training, not pre-recorded)
29-Oct-2024
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Mitigating The Risk Of Flow-Accelerated Corrosion (Live Training, not pre-recorded)
30-Oct-2024
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Mitigating The Risk Of Flow-Accelerated Corrosion (Live Training, not pre-recorded)
06-Nov-2024
9:30 am - 3:30 pm
EST (Eastern Standard Time)
Industrial Cooling Water Treatment (Live Training, not pre-recorded)
13-Nov-2024
9:30 am - 3:30 pm
EST (Eastern Standard Time)
Cycle Chemistry for Power Plants - High-Pressure Boilers (Live Training, not pre-recorded)
19-Nov-2024
9:30 am - 3:30 pm
EST (Eastern Standard Time)
Reverse Osmosis and Nanofiltration Plant Technology – Best Practices (Live Training, not pre-recorded)
21-Nov-2024
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Steam Purity Best Practices (Live Training, not pre-recorded)
29-Nov-2024
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Layup (Storage) Best Practices for Steam-Water Touched Equipment
07-Jan-2025
9:30 am - 1:30 pm
EST (Eastern Standard Time)
Root Cause Analysis for Boiler & HRSG Failures
15-Jan-2025
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Optimization of Mechanical and Chemical Deaeration for Steam Plants
16-Jan-2025
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Best Practices of Controlling Microbiology of Industrial Cooling Systems

 

 

Agenda

 

  • Introduction
    • Types of steam generation systems and points of FAC susceptibility
    • Single-phase and Two-phase FAC (proper identification is a critical step)
  • Diagnosis
    • Failure morphology
    • Other leading indicators
  • Key parameters controlling the rate of FAC
    • Temperature, pH, ORP, and others
    • The critical role of fluid turbulence in FAC
    • Metallurgical influences
    • Design factors
    • Operational factors
  • Impact of cycling and part-load operation on the rate of FAC
  • The use of chemical additives to mitigate FAC (e.g., alkalizing and filming amines)
  • The role of a FAC Plant Management Program
  • Detailed case studies
  • Best Practices Summary

 

                                +++

Make sure to take a look at other upcoming courses:

Date/Time Event
20-Sep-2024
9:30 am - 3:30 pm
EST (Eastern Standard Time)
Industrial Cooling Water Treatment (Live Training, not pre-recorded)
25-Sep-2024
9:30 am - 3:30 pm
EST (Eastern Standard Time)
Cycle Chemistry for Power Plants - High-Pressure Boilers (Live Training, not pre-recorded)
01-Oct-2024
9:30 am - 3:30 pm
EST (Eastern Standard Time)
Reverse Osmosis and Nanofiltration Plant Technology – Best Practices (Live Training, not pre-recorded)
03-Oct-2024
9:30 am - 2:30 pm
EST (Eastern Standard Time)
Industrial Boiler Water Treatment - Low to Medium Pressure (Live Training, not pre-recorded)
08-Oct-2024
9:30 am - 2:30 pm
EST (Eastern Standard Time)
Industrial Boiler Water Treatment - Low to Medium Pressure (Live Training, not pre-recorded)
09-Oct-2024
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Layup (Storage) Best Practices for Steam-Water Touched Equipment (Live Training, not pre-recorded)
17-Oct-2024
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Fundamentals of Industrial Water Treatment Chemistry (Live Training, not pre-recorded)
22-Oct-2024
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Fundamentals of Industrial Water Treatment Chemistry (Live Training, not pre-recorded)
29-Oct-2024
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Mitigating The Risk Of Flow-Accelerated Corrosion (Live Training, not pre-recorded)
30-Oct-2024
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Mitigating The Risk Of Flow-Accelerated Corrosion (Live Training, not pre-recorded)
06-Nov-2024
9:30 am - 3:30 pm
EST (Eastern Standard Time)
Industrial Cooling Water Treatment (Live Training, not pre-recorded)
13-Nov-2024
9:30 am - 3:30 pm
EST (Eastern Standard Time)
Cycle Chemistry for Power Plants - High-Pressure Boilers (Live Training, not pre-recorded)
19-Nov-2024
9:30 am - 3:30 pm
EST (Eastern Standard Time)
Reverse Osmosis and Nanofiltration Plant Technology – Best Practices (Live Training, not pre-recorded)
21-Nov-2024
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Steam Purity Best Practices (Live Training, not pre-recorded)
29-Nov-2024
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Layup (Storage) Best Practices for Steam-Water Touched Equipment
07-Jan-2025
9:30 am - 1:30 pm
EST (Eastern Standard Time)
Root Cause Analysis for Boiler & HRSG Failures
15-Jan-2025
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Optimization of Mechanical and Chemical Deaeration for Steam Plants
16-Jan-2025
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Best Practices of Controlling Microbiology of Industrial Cooling Systems

 

The course fee is USD $345.00.

You can pay by credit card using Stripe. Click here to learn more.

All bookings are subject to acceptance of our Privacy Policy, Terms & Conditions and Cancellation & Refunds Policy.

 

                                +++

Make sure to take a look at other upcoming courses:

Date/Time Event
20-Sep-2024
9:30 am - 3:30 pm
EST (Eastern Standard Time)
Industrial Cooling Water Treatment (Live Training, not pre-recorded)
25-Sep-2024
9:30 am - 3:30 pm
EST (Eastern Standard Time)
Cycle Chemistry for Power Plants - High-Pressure Boilers (Live Training, not pre-recorded)
01-Oct-2024
9:30 am - 3:30 pm
EST (Eastern Standard Time)
Reverse Osmosis and Nanofiltration Plant Technology – Best Practices (Live Training, not pre-recorded)
03-Oct-2024
9:30 am - 2:30 pm
EST (Eastern Standard Time)
Industrial Boiler Water Treatment - Low to Medium Pressure (Live Training, not pre-recorded)
08-Oct-2024
9:30 am - 2:30 pm
EST (Eastern Standard Time)
Industrial Boiler Water Treatment - Low to Medium Pressure (Live Training, not pre-recorded)
09-Oct-2024
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Layup (Storage) Best Practices for Steam-Water Touched Equipment (Live Training, not pre-recorded)
17-Oct-2024
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Fundamentals of Industrial Water Treatment Chemistry (Live Training, not pre-recorded)
22-Oct-2024
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Fundamentals of Industrial Water Treatment Chemistry (Live Training, not pre-recorded)
29-Oct-2024
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Mitigating The Risk Of Flow-Accelerated Corrosion (Live Training, not pre-recorded)
30-Oct-2024
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Mitigating The Risk Of Flow-Accelerated Corrosion (Live Training, not pre-recorded)
06-Nov-2024
9:30 am - 3:30 pm
EST (Eastern Standard Time)
Industrial Cooling Water Treatment (Live Training, not pre-recorded)
13-Nov-2024
9:30 am - 3:30 pm
EST (Eastern Standard Time)
Cycle Chemistry for Power Plants - High-Pressure Boilers (Live Training, not pre-recorded)
19-Nov-2024
9:30 am - 3:30 pm
EST (Eastern Standard Time)
Reverse Osmosis and Nanofiltration Plant Technology – Best Practices (Live Training, not pre-recorded)
21-Nov-2024
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Steam Purity Best Practices (Live Training, not pre-recorded)
29-Nov-2024
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Layup (Storage) Best Practices for Steam-Water Touched Equipment
07-Jan-2025
9:30 am - 1:30 pm
EST (Eastern Standard Time)
Root Cause Analysis for Boiler & HRSG Failures
15-Jan-2025
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Optimization of Mechanical and Chemical Deaeration for Steam Plants
16-Jan-2025
9:30 am - 1:00 pm
EST (Eastern Standard Time)
Best Practices of Controlling Microbiology of Industrial Cooling Systems

 

Online Courses / Webinars Withdrawal, Cancellation and Rescheduling

By registering for an online training course or webinar organised by Industrial Water Treatment Academy (iwtA) you agree to the following Training Cancellation policy as well to our general Terms and Conditions and Privacy Policy (both available on our website iwtacademy.com), regardless of whether such registration was made through iwtacademy.com website or via email, telephone, or any other means.

If you wish to withdraw from an online training event (online course or webinar), you must first advise us by email, and include the official payment receipt.  Our policies regarding refunds are:

  • You may cancel online-based training bookings at any time.
  • If you cancel more than 10 (ten) business days before the training event:  the full amount will be refunded minus a US$75.00 and a US$35.00 administration charge for an online course and webinar, respectively.
  • If you cancel between 3 and 9 business days before the training event: 50% of the full amount paid will be refunded.
  • If you cancel less than 3 (three) business days in advance:  you can request a non-refundable credit, valid for 12 months from the date of the original payment, which can be applied to a different iwtA online course or webinar. Credits are transferable within your company – simply contact the Registrar at info@iwtacademy.com with your request giving the name and email address of the co-worker taking your place.
  • If an instructor is not available due to unforeseen circumstances, another instructor of equal ability (decided at the sole discretion of iwtA) will be substituted whenever possible; if a suitable instructor is unavailable, the course will be cancelled and rescheduled. iwtA reserves the right to cancel courses, change instructors, or change course content. If iwtA has to cancel a course due to unforeseen circumstances, a full refund will be issued to the registrant.
  • No training booking will be final and confirmed until the full amount is paid either by credit card or bank transfer.

A Certificate of Completion will be awarded to all participants that attend a given online course or webinar in its entirety.

The Industrial Water Treatment Academy (iwtA) is currently in the initial stages of seeking an ANSI-accredited international standard certification in Continuing Education that will enable iwtA to award Continuing Education Units (CEUs) to its course participants. We expect this milestone to be reached by 2023.

You must make the payment through the intermediary (Paypal or Stripe) in USD or other foreign currency subject to exchange rates and/or service commissions.

Deverá efectuar o pagamento ao intermediário (Paypal ou Stripe) em USD ou outra moeda estrangeira sujeita às taxas de câmbio e/ou comissões pelo serviço.

Refunds and cancellation policy

 

Mitigating The Risk Of Flow-Accelerated Corrosion (Live Training, not pre-recorded)

Register now

Tickets

Ticket for the webinar

USD $345.00

Attendee details

Registration Information

Payment details

Booking Summary

1
x Standard Ticket
USD $345.00
Total Price
USD $345.00

You can pay with
Stripe, the world’s leading payment gateway. Stripe is fully secure, and iWTA never have access to your card details.


Learn more about Stripe

Pin It on Pinterest

Share This